Data Sets 132, 142, 152 - Technology Parameters 3: Reading/Writing Sets 1, 2, 3 - Siemens 3RW44 Manual

PROFIBUS DP communication module
9.12 Data sets (BS)
ID No. Byte Meaning
Bit
43 131 Slow speed rotation factor: CW
198 132 Slow speed rotation factor: CCW
44 133 Slow speed torque CW
199 134 Slow speed torque CCW
135...137 Reserved = 0
Dependencies
● Upper current limit > lower current limit
● DC braking can only be selected when the "DC braking contactor" function is assigned to
an output.
● Maximum starting time ≥ starting time
● Limiting torque > starting torque
9.12.16 Data sets 132, 142, 152 - Technology parameters 3:
Reading/writing sets 1, 2, 3
Byte
Header
0
1 - 3
Table 9- 31

Data sets 132, 142, 152 - Technology parameters 3: Reading/writing sets 1, 2, 3

ID No. ByteBit Meaning
4 - 9 Reserved = 0
104 10 - 11 Rated speed
12 - 18 Reserved = 0
113 19 - 20 Rated torque
21 - 63 Reserved = 0
212
Value
Bit
Coordination
Reserved = 0
Only in Value range/[coding]
data set
131
3 ... 21 [3 ... 21]
3 ... 21 [3 ... 21]
20 ... 100 % [4 ... 20]
20 ... 100 % [4 ... 20]
Note
0x20 Writing via C1 channel (PLC)
0x30 Writing via C2 channel (PC)
0x40 Writing 0x40 via device interface (PC)
Value range [coding]
500 ... 3 600 rpm [500 ... 3 600]
0 ... 65 535 Nm [0 ... 65 535]
Manual, 03/2017, NEB535219502000/RS-AB/008
Factor
1
1
5 %
5 %
Factor
1 rpm
1 Nm
3RW44 soft starters