Siemens 3RW44 Manual page 196

PROFIBUS DP communication module
9.12 Data sets (BS)
ID No. Byte
Bit
341 4
1
334 4
2
335 4
3
336 4
4
4
5
4
6
339 4
7
344 5
0
345 5
1
346 5
2
347 5
3
5
4-7
342 6
0
343 6
1
353 6
2
6
3
196
Alarm bit
Asymmetry tripping
I limit value overshot
e
I limit value undershot
e
I current limit tripping
e
Reserved = 0
Reserved = 0
Motor stalled - switched off
Input 1
Input 2
Input 3
Input 4
Reserved = 0
Ground fault detected
Ground fault tripping
Quick stop active
Reserved = 0
Error Meaning/acknowledgment
No.
*)
F24 Tripping of the motor due to
asymmetry.
Alarm bit is automatically deleted
when the cause of the fault has
been removed and acknowledged
with "trip reset".
F7 Limit exceeded, alarm bit is updated
continually.
F8 Limit undershot, alarm bit is
updated continually.
F24 Alarm bit is automatically deleted
when the cause of the fault has
been removed and acknowledged
with "trip reset".
-
-
F24 Trip, stalling current detected for
longer than the permitted stalling
time.
Alarm bit is automatically deleted
when the cause of the fault has
been removed and acknowledged
with "trip reset".
- States of the inputs
- "1" = active, HIGH level is present
"0" = inactive, LOW level is present
-
Alarm bit is updated continually.
-
-
- Ground fault is present, alarm bit is
updated continually.
F24 Tripping of the motor due to ground
fault.
Alarm bit is automatically deleted
when the cause of the fault has
been removed and acknowledged
with "trip reset".
F26, F24 Tripping of the motor due to quick
stop.
Alarm bit is automatically deleted
when the cause of the fault has
been removed and acknowledged
with "trip reset".
-
Manual, 03/2017, NEB535219502000/RS-AB/008
3RW44 soft starters