Siemens 3RW44 Manual page 159

9.4 Activating the PROFIBUS DP communication module (fieldbus interface) and setting the station address
5. In order to permanently save the settings, proceed as follows:
Note
If the "Parameters disabled CPU/Master" parameter is set to "Off" (factory setting) in the
"Fieldbus" menu, the parameters set on the soft starter will be overwritten with the values
stored in the GSD file or in the OM when the bus is started. If this is not desired, the
parameter must be set to "On".
3RW44 soft starters
Manual, 03/2017, NEB535219502000/RS-AB/008
PROFIBUS DP communication module
159