Display the Oracle ILOM Prompt
You should now see the OpenBoot prompt. If the server is still not responding, perform the next
steps.
If more than 10 minutes have passed since you typed the following command,
5.
do so again.
-> set /HOST/bootmode script="setenv auto-boot? false"
6.
Type:
-> reset /System
-> start /HOST/console
Related Information
"Obtaining the OpenBoot Prompt" on page 38
■
"Monitoring the Server" on page 79
■
Display the Oracle ILOM Prompt
Display the Oracle ILOM prompt in one of these ways:
■
From the system console, type the Oracle ILOM escape sequence (#.).
Log in to Oracle ILOM directly from a device connected to the SER MGT port
■
or NET MGT port.
Log in to Oracle ILOM through an SSH connection.
■
See
Related Information
"Oracle ILOM Overview" on page 11
■
"Log In to Oracle ILOM" on page 19
■
"Obtain the OpenBoot Prompt Under Various Conditions" on page 21
■
22
SPARC and Netra SPARC S7-2 Series Servers Administration Guide • March 2017
"Log In to Oracle ILOM" on page
19.