Locate Device Paths (Openboot) - Oracle Netra SPARC S7-2 Series Administration Manual

/SYS/MB/PCIE_SWITCH1/PCIE_LINK4
/SYS/MB/PCIE_SWITCH1/PCIE_LINK5
/SYS/MB/PCIE_SWITCH1/PCIE_LINK6
/SYS/MB/PCIE_SWITCH1/PCIE_LINK7
/SYS/MB/PCIE_SWITCH1/PCIE_LINK8
/SYS/MB/PCIE_SWITCH1/PCIE_LINK12 | current_config_state
/SYS/MB/RISER1/PCIE1
/SYS/MB/RISER2/PCIE2
/SYS/MB/RISER3/PCIE3
/SYS/MB/RISER3/PCIE4
/SYS/MB/USB_CTRL
/SYS/MB/XGBE
->
Related Information
"Locate Device Paths (OpenBoot)" on page 73
■

Locate Device Paths (OpenBoot)

1. Display the OpenBoot prompt.
See "Obtain the OpenBoot Prompt Under Various Conditions" on page
2. From the OpenBoot prompt, type:
This document applies to several server products. The following example is based on the
Note -
SPARC S7-2 server. Your output might vary from the examples based on your product.
ok devalias
fallback-miniroot
rcdrom
disk7
disk6
disk5
disk4
disk3
disk2
disk1
disk
disk0
sas0
sas
nvme3
| current_config_state
| current_config_state
| current_config_state
| current_config_state
| current_config_state
| current_config_state
| current_config_state
| current_config_state
| current_config_state
| current_config_state
| current_config_state
/pci@300/pci@1/pci@0/pci@2/usb@0/hub@2/storage@1/disk@0
/pci@300/pci@1/pci@0/pci@2/usb@0/hub@2/storage@1/disk@0
/pci@302/pci@2/pci@0/pci@14/LSI,sas@0/disk@p4
/pci@302/pci@2/pci@0/pci@14/LSI,sas@0/disk@p5
/pci@302/pci@2/pci@0/pci@14/LSI,sas@0/disk@p7
/pci@302/pci@2/pci@0/pci@14/LSI,sas@0/disk@p6
/pci@302/pci@2/pci@0/pci@14/LSI,sas@0/disk@p0
/pci@302/pci@2/pci@0/pci@14/LSI,sas@0/disk@p1
/pci@302/pci@2/pci@0/pci@14/LSI,sas@0/disk@p3
/pci@302/pci@2/pci@0/pci@14/LSI,sas@0/disk@p2
/pci@302/pci@2/pci@0/pci@14/LSI,sas@0/disk@p2
/pci@302/pci@2/pci@0/pci@14/LSI,sas@0
/pci@302/pci@2/pci@0/pci@14/LSI,sas@0
/pci@302/pci@2/pci@0/pci@7/nvme@0/disk@1
Locate Device Paths (OpenBoot)
| Enabled
| Enabled
| Enabled
| Enabled
| Enabled
| Enabled
| Enabled
| Enabled
| Enabled
| Enabled
| Enabled
| Enabled
21.
Matching Devices to Device Names 73