Boot Mode Overview (Oracle Ilom) - Oracle Netra SPARC S7-2 Series Administration Manual

ttya-mode
output-device
input-device
auto-boot-on-error?
load-base
auto-boot?
os-root-device
network-boot-arguments
boot-command
boot-file
boot-device
multipath-boot?
boot-device-index
use-nvramrc?
nvramrc
error-reset-recovery
If any value in the printenv output is truncated, you can see the full entry by typing printenv
followed by the variable name. For example:
{0} ok printenv boot-device
boot-device =
Related Information
"OpenBoot Configuration Parameters" on page 47
■

Boot Mode Overview (Oracle ILOM)

Boot mode (bootmode) properties enable you to override the default method the server uses
when it boots. This ability is useful to override particular OpenBoot or Oracle VM Server
for SPARC settings that might be incorrect, to set up OpenBoot variables using a script, or to
perform similar tasks.
For example, if the OpenBoot settings have become corrupt, you can set the bootmode state
property to reset_nvram, then reset the server to its factory default OpenBoot settings.
Service personnel might instruct you to use the bootmode script property for problem resolution.
The full extent of script capabilities are not documented and exist primarily for debugging.
9600,8,n,1,-
virtual-console
virtual-console
false
16384
false
boot
/pci@300/pci@2/pci@0/pci ...
false
0
false
boot
/pci@302/pci@2/pci@0/pci@17/LSI,sas@0/disk@p2
Boot Mode Overview (Oracle ILOM)
9600,8,n,1,-
virtual-console
virtual-console
false
16384
true
boot
disk net
false
0
false
boot
disk net
Configuring Boot and Restart Behavior 49