Reset The Sp - Oracle Netra SPARC S7-2 Series Administration Manual

Reset the SP

Note -
powered on. To learn about the parameters that control this action, see
Parameters" on page
1. Log in to Oracle ILOM.
See "Log In to Oracle ILOM" on page
2. Type one of these commands to reset the server.
Perform a graceful reset.
■
-> reset /System
If a graceful reset is not possible, perform a forced hardware reset.
■
-> reset -force /System
Related Information
"Power On the Server (Oracle ILOM CLI)" on page 26
■
"Power On the Server (Oracle ILOM Web Interface)" on page 27
■
"Reset the Server (Oracle Solaris)" on page 31
■
"Override OpenBoot Settings to Reset the Server" on page 53
■
Reset the SP
After the reset, your login session to the SP is terminated.
1. Log in to Oracle ILOM.
See "Log In to Oracle ILOM" on page
2. Reset the SP.
-> reset /SP
Related Information
"Log In to Oracle ILOM" on page 19
■
32 SPARC and Netra SPARC S7-2 Series Servers Administration Guide • March 2017
By default, the host automatically attempts to boot when the host is reset or
43.
19.
19.
"Configuring Boot