Table of Contents
Advertisement
4.
Start all of the nonprimary domains.
Starting a domain automatically binds the domain.
# ldm start-domain domain-name
< . . . >
5.
Boot all of the nonprimary domains.
The method you use to access a domain depends on how you have configured the consoles for
your domains.
Boot each domain the same way you boot a server. See
ILOM)" on page
35.
Related Information
"Power Off a Server With Multiple Active Domains (Oracle VM Server for
■
SPARC)" on page 29
Power Off a Server With Multiple Active Domains
(Oracle VM Server for SPARC)
If the server is configured with multiple Oracle VM for SPARC domains, use this procedure to
shut down the domains and power off the server.
1.
If needed, ensure that the domain configurations are saved to the SP.
# ldm add-config config-name
2.
Access and shut down the OS in all of the nonprimary domains.
The method you use to access a domain depends on how you have configured the consoles for
your domains.
To shut down the OS, see
Down the OS (shutdown Command)" on page
a.
From the primary domain, list the domains and their states.
# ldm ls
Note which domains are non-I/O domains or active I/O domains.
b.
Stop and unbind all the non-I/O domains.
Power Off a Server With Multiple Active Domains (Oracle VM Server for SPARC)
"Shut Down the OS (init Command)" on page 36
37.
"Boot the OS (Oracle
or
Controlling the Server
"Shut
29
Advertisement
Table of Contents
