Multipathing Software Overview; Oracle Hardware Management Pack Overview - Oracle Netra SPARC S7-2 Series Administration Manual

Netra sparc s7-2 series; sparc series cloud servers
Table of Contents

Advertisement

"Configuring Boot and Restart Behavior" on page 43

Multipathing Software Overview

Multipathing software enables you to define and control redundant physical paths to I/O
devices such as storage devices and network interfaces. If the active path to a device becomes
unavailable, the software can automatically switch to an alternate path to maintain availability.
This capability is known as automatic failover. To take advantage of multipathing capabilities,
you must configure the server with redundant hardware, such as redundant network interfaces
or two host bus adapters (HBAs) connected to the same dual-ported storage array.
For the servers, different types of multipathing software are available:
Oracle Solaris IP Network Multipathing software provides multipathing and load-balancing
capabilities for IP network interfaces. This software includes commands and other software
resources for server administration. For instructions on how to configure and administer
Oracle Solaris IP Network Multipathing, refer to Oracle Solaris Administration: Network
Services and Network Virtualization.
Oracle Solaris Multiplexed I/O (MPxIO) is an architecture fully integrated within the
Oracle Solaris OS that enables I/O devices to be accessed through multiple host controller
interfaces from a single instance of the I/O device. (Previously, this functionality was
called StorageTek Traffic Manager.) For information about MPxIO, refer to Oracle Solaris
Administration: SAN Configuration and Multipathing Guide.
Related Information
"Oracle Solaris OS Overview" on page 12
"Oracle VM Server for SPARC Overview" on page 14

Oracle Hardware Management Pack Overview

The Oracle Hardware Management Pack provides tools to manage and configure Oracle servers
from the host OS. Oracle Solaris includes Oracle Hardware Management Pack starting with
Oracle Solaris 11.2. The tools include a utility for managing NVMe devices (nvmeadm) and for
updating firmware in various hardware devices in the server (fwupdate).
You can read and download documentation for the version of Oracle Hardware Management
Pack for Oracle Solaris that you are using at:
Multipathing Software Overview
Understanding System Administration Resources
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sparc series

Table of Contents