Reset The Server (Oracle Solaris); Reset The Server (Oracle Ilom) - Oracle Netra SPARC S7-2 Series Administration Manual

"Reset the Server (Oracle Solaris)" on page 31
■
"Reset the Server (Oracle ILOM)" on page 31
■
"Reset the SP" on page 32
■
Related Information
"Powering the Server On and Off" on page 25
■

Reset the Server (Oracle Solaris)

It is not necessary to power the server off and on to perform a reset.
By default, the host automatically attempts to boot when the host is reset or
Note -
powered on. To learn about the parameters that control this action, see
Parameters" on page
1. Log in to Oracle Solaris as a user with root privileges.
2. Reset the server from the Oracle Solaris prompt, by typing one of these
commands:
■
# shutdown -g0 -i6 -y
■
# reboot
Related Information
"Power Off the Server (Oracle ILOM CLI)" on page 26
■
"Power On the Server (Oracle ILOM Web Interface)" on page 27
■
"Reset the Server (Oracle ILOM)" on page 31
■

Reset the Server (Oracle ILOM)

The Oracle ILOM reset command generates a graceful or forced hardware reset of the server.
By default, the reset command gracefully resets the server.
43.
Reset the Server (Oracle Solaris)
"Configuring Boot
Controlling the Server 31