Ncu Parameters - Ricoh D127 Field Service Manual

Hide thumbs Also See for D127:

Table of Contents

NCU Parameters

• The following tables give the RAM addresses and the parameter calculation units that the machine

uses for ringing signal detection and automatic dialing. The factory settings for each country are

also given. Most of these must be changed by RAM read/write (SP2-101), but some can be

changed using NCU Parameter programming (SP2-103); if SP2-103 can be used, this will be

indicated in the Remarks column. The RAM is programmed in hex code unless (BCD) is included in

the Unit column.

Table of Contents