Sp Modes Related To Printer Controller; Scanner Program Mode Table (Scanner Sp Tables); Service Table Key - Ricoh D127 Field Service Manual

3. Appendix: SP Mode Tables
1110 2 Media Print Device Setting

SP Modes Related to Printer Controller

The following SP modes are located in the system SP mode. Refer to section 5.1 of the main unit service
manual.
SP No.
5801
Memory All Clear
-001
Plug & Play Maker/
5907
Model Name
Self-Diagnose Result
7832
Display

Scanner Program Mode Table (Scanner SP Tables)

Service Table Key

Notation
[range / default /
step]
italics
*
DFU
154
Description
Resets data for process control and all software counters, and
returns all modes and adjustments to their defaults values.
Section "Memory Clear" in this chapter for details.
Selects the brand name and the production name for Windows
Plug & Play. This information is stored in NVRAM.
Displays the controller self-diagnostic result.
Example: [-9 to +9 / +3.0 / 0.1 mm step]. The setting can be adjusted in the
range ±9, value reset to +3.0 after an NVRAM reset, and the value can be
changed in 0.1 mm steps with each key press.
Comments added for your reference.
This value is stored in NVRAM. After a RAM reset, the default value (factory
setting) is restored.
Denotes "Design or Factory Use". Do not change this value.
[0: Disabled 1: Enabled]
Sets I/F (USB/SD device) Enabled/Disabled on the
media print function.
Function and Setting
What it means