Joint Bracket (Joint The Copier And The Upper Ptu) - Ricoh D127 Field Service Manual

2. Installation
37. Plug in the power cord, and check the operation.

Joint bracket (Joint the copier and the upper PTU)

1. Remove each of the drawers.
2. Insert the joint bracket (Front) [1] into the slot as the arrow shows and fasten (
3. Attach the joint bracket (Rear) [2] as shown. (
• The red arrow on the picture above shows the convex side of the screw hole. This is the important
clue to attach the bracket correctly.
56
x 2)
x 2)