Appendix: Sp Mode Tables; System Service Mode; Service Mode Tables (System Sp Tables); Sp1-Xxx (Feed) - Ricoh D127 Field Service Manual

3. Appendix: SP Mode Tables

System Service Mode

Service Mode Tables (System SP Tables)

SP1-XXX (Feed)

1001* LE Registration
1001 1 All Trays
1001 2 By-pass
1001 3 Duplex
1002* S-to-S Regist
1002 1 1st Tray
1002 2 2nd Tray
1002 3 3rd Tray
1002 4 By-pass
1002 5 Duplex
1003* Paper Feed Timing
1003 1 1st tray
1003 2 Bank Trays
1003 3 By-pass
1003 4 Duplex
[–9.0 to 9.0 / 0.0 / 0.1 mm/step]
Adjusts the leading-edge registration (
Copy Image Area" in the section "Replacement and
Adjustment").
[–9.0 to 9.0 / 0.0 / 0.1 mm/step]
Adjusts the side-to-side registration (
Copy Image Area" in the section "Replacement and
Adjustment"). SP1-002-001 is applied to all trays.
SP1-002-002, 003 and 005 adjusts the difference
from SP1-002-001.
Adjusts the side-to-side registration of the 2nd side in
duplex copying. The 1st side is adjusted by
SP1-002-001 through 005.
Adjusts the amount of paper buckle on the registration
roller.
[-5 to 5 / 0 / 1 mm/step]
"Adjusting
"Adjusting
21