1. Use the numeric key "4" to turn bit 4 ON and be sure to press "#" button to confirm. The result
should look like: 00010000 as shown above. By doing this Card Save option will appear in "List/
Test Print".
2. Exit SP Mode.
3. Press the "
" button.
4. Select "Printer Features".
5. Select "List/Test Print".
1. Select "Card Save (ADD) or Card Save (New)".
2. Select OK to the message "Switching to Card Save mode.". Then exit the "List/Test Print" menu.
3. Send a job to the printer.
4. As soon as the printer receives the data, it will be stored on the SD card automatically with no print
output. Nothing is displayed on the screen indicating that a Card Save operation was successful.
Card Save Function
193