Danfoss VT2800 Series Design Manual page 96

349 Speed comp delay
(SPEED COMP DELAY)
Value:
0 ms - 100 ms
Function:
In this parameter the user can set the system's
delay time (Sensor, PLC, etc.). If you are running
speed-compensated stop, the delay time at
different frequencies has a major influence on
the way in which you stop.
Description of choice:
The factory setting is 10 ms. This means that it is
assumed that the total delay from the Sensor, PLC
and other hardware corresponds to this setting.
NB!:
Only acti v e for speed-compensated stop.
= factory setting. () = display text [] = value for use in communication via serial communication port
96
10 ms
MG.28.E9.02 - VLT is a registered Danfoss trademark
®
VLT 2800 Series