Materials - ABB ACS880-37 Hardware Manual

Contamination
Chemical gases
Solid particles
Vibration
IEC/EN 61800-5-1
IEC 60068-2-6:2007,
EN 60068-2-6:2008
Environmental testing Part
2: Tests –Test Fc:
Vibration (sinusoidal)
Shock
IEC 60068-2-27:2008,
EN 60068-2-27:2009
Environmental testing -
Part 2-27: Tests - Test Ea
and guidance: Shock

Materials

Cabinet
Busbars
Fire safety of materials
(IEC 60332-1)
IEC/EN 60721-3-3:2002:
Classification of
environmental conditions
- Part 3-3: Classification
of groups of
environmental
parameters and their
severities - Stationary
use of weather protected
locations
Class 3C2
Class 3S2. No
conductive dust allowed.
IEC/EN 60721-3-3:2002
10...57 Hz: max.
0.075 mm amplitude
57...150 Hz: 1 g
Units with marine
construction (option
+C121):
Max. 1 mm (0.04 in.)
(5 ... 13.2 Hz),
max. 0.7 g
(13.2 ... 100 Hz)
sinusoidal
Not allowed
Hot-dip zinc coated 1.5 mm thick steel sheet (thickness of coating approximately
20 micrometers). Polyester thermosetting powder coating (thickness
approximately 80 micrometers) on visible surfaces, color RAL 7035 and RAL
9017.
Tin-plated copper
Insulating materials and non-metallic items mostly self-extinctive
IEC 60721-3-1:1997
Class 1C2
Class 1S3 (packing must
support this, otherwise
1S2)
IEC/EN 60721-3-1:1997
10...57 Hz: max.
0.075 mm amplitude
57...150 Hz: 1 g
With packing max.
2 2
100 m/s (330 ft./s )
11 ms
Technical data 191
IEC 60721-3-2:1997
Class 2C2
Class 2S2
IEC/EN 60721-3-2:1997
2...9 Hz: max. 3.5 mm
amplitude
2
9...200 Hz: 10 m/s
2
(32.8 ft/s )
With packing max.
2 2
100 m/s (330 ft./s )
11 ms