Type Designation Key - ABB ACS880-37 Hardware Manual

Type designation key

The type designation contains information on the specifications and configuration of the
drive. The first digits from left express the basic configuration (eg, ACS880-37-1210A-3).
The optional selections are given thereafter, separated by plus signs, eg, +E202. The main
selections are described below. Not all selections are available for all types. For more
information, refer to ACS880-X7 single drives ordering information (3AXD10000052815,
available on request).
CODE DESCRIPTION
Basic codes
ACS880 Product series
37 When no options are selected: cabinet-installed drive, IP22 (UL Type 1), main switch-
disconnector (and contactor) or breaker, aR fuses, ACS-AP-W Assistant control panel, EMC filter
(category 3, 2nd Environment), du/dt filters, common mode filtering, ACS880 primary control
program, Safe torque off function, coated circuit boards, bottom entry and exit of cables with lead-
through-type entries, multilingual door device label sticker, USB memory stick containing circuit
diagrams, dimension drawings and manuals.
Size
xxxxx Refer to the rating tables (page 179)
Input voltage range
3 380...415 V AC. This is indicated in the type designation label as typical input voltage level
(3~ 400 V AC)
5 380...500 V AC. This is indicated in the type designation label as typical input voltage levels
(3~ 400/480/500 V AC)
7 525...690 V AC. This is indicated in the type designation label as typical input voltage levels
(3~ 525/600/690 V AC)
Option codes (plus codes)
Degree of protection
B054 IP42 (UL Type 1)
B055 IP54 (UL Type 12)
Construction
C121 Marine construction (page 46)
C128 Air inlet through bottom of cabinet (page 45)
C129 UL Listed (page 46)
C130 Channeled air outlet (page 45)
C134 CSA approved (page 46)
C164 Plinth height 100 mm (page 46)
C179 Plinth height 200 mm (page 46)
C180 Seismic design (page 46)
C199 Empty 400 mm wide cubicle on left
C200 Empty 600 mm wide cubicle on left
C201 Empty 800 mm wide cubicle on left
Resistor braking
D150 Brake choppers (page 47)
D151 Brake resistors (page 47)
Filters
E202 EMC filter for first environment TN (grounded) system, category C2 (page 47)
E206 Sine output filter (page 47)
Operation principle and hardware description 55