Control units of the drive
What this chapter contains
This chapter
•
describes the connections of the control units used in the drive,
•
contains the specifications of the inputs and outputs of the control units.
General
The ACS880 drive utilizes BCU-x2 control units. The BCU-x2 consists of a BCON-12
control board (and a BIOC-01 I/O connector board and power supply board) built in a
metal housing.
The supply and inverter units of the ACS880-37 are each controlled by a dedicated
BCU-x2 control unit. The designation of the supply control unit is A51; the inverter control
unit is A41. Both are located in the ACU cubicle (see the drawings in chapter
principle and hardware
inverter modules respectively) by fiber optic cables.
In this manual, the name "BCU-x2" represents the control unit types BCU-02 and BCU-12.
These have a different number of power module connections (2 and 7 respectively) but are
otherwise similar.
description), and connect to the power modules (ie. supply and
Control units of the drive 131
7
Operation