Fault tracing
Contents of this chapter
This chapter describes the fault tracing possibilities of the drive.
LEDs
Where
LED
Control
POWER
panel
mounting
FAULT
platform
Supply or
BATT OK
inverter
control unit
(A51 or
A41)
PWR OK
FAULT
WRITE
Warning and fault messages
See the firmware manual for the descriptions, causes and remedies of the drive control
program warning and fault messages.
Color
Indication
Green
Control unit is powered and +15 V is supplied to the control
panel.
Red
Drive in fault state.
Green
Battery voltage of the real-time clock is OK (higher than 2.8 V).
When the LED is not lit,
• battery voltage is below 2.8 V,
• the battery is missing, or
• the control unit is not powered.
Green
Internal voltage OK
Red
The control program indicates that the equipment is faulty. See
the appropriate firmware manual.
Yellow
Writing to SD card in progress.
Fault tracing 149
10