Registration; Idle Screen - Yealink SIP-T27P User Manual

User Guide for the SIP-T27P IP Phone
Enter the desired value in the IP Address, IPv6 IP Prefix, Default Gateway, Pri.DNS and
4.
Sec.DNS field respectively.
Press the Save soft key to accept the change or the Back soft key to cancel.
5.
Note The wrong network settings may result in inaccessibility of your phone and may also have an
impact on your network performance. For more information on these parameters, contact your
system administrator.

Registration

Generally, your phone will be deployed with multiple other phones. In this case, your system
administrator will configure the phone parameters beforehand, so that after you start up your
phone, the phone will be registered and ready for use. The SIP-T27P IP phone supports up to 6
accounts. If your phone is not registered, you may have to register it. For more information on
how to register your phone, refer to

Idle Screen

If the phone has successfully started up, the idle LCD screen will be displayed as below.
22
Account Management on page 77.