Attended Transfer - Yealink SIP-T27P User Manual

group and search for the contact (Directory should be configured in advance. Refer to
Directory
Press
Press the Directory soft key, and then select History. Select the desired list and then
-
press
Refer to
Press
Press the Directory soft key, and then select Remote Phone Book. Select the desired
-
group and search for the contact (Directory should be configured in advance. Refer to
Directory
Press
If Allow Trans Exist Call (refer to
-
can select the New Call and repeat steps mentioned above to complete transfer.
Press
3.
If you are using a handset, the transfer can be completed by hanging up the handset.

Attended Transfer

Before performing an attended transfer (except you use dial number method), make sure that
the transfer mode on DSS key is configured as New Call or Attended Transfer. For more
information on how to configure it, refer to
142.
To perform an attended transfer:
Press
1.
Do one of the following:
2.
- Enter the number you want to transfer the call to.
Press
Press the Directory soft key, and then select Local Directory. Select the desired
-
group and search for the contact (Directory should be configured in advance. Refer to
Directory
Press
- Press the Directory soft key, and then select History. Select the desired list and then
press
Refer to
Press
- Press the Directory soft key, and then select Remote Phone Book. Select the desired
group and search for the contact (Directory should be configured in advance. Refer to
Directory
on page 42 for more information).
, or the Send soft key to dial out.
or to select the entry (Directory should be configured in advance.
Directory on page 42 for more information).
, or the Send soft key to dial out.
on page 42 and Remote Phone Book
, or the Send soft key to dial out.
or the Transfer soft key to complete the transfer when receiving ringback.
or the Transfer soft key during a call.
or to dial out.
on page 42 for more information).
, or the Send soft key to dial out.
or to select the entry (Directory should be configured in advance.
Directory on page 42 for more information).
, or the Send soft key to dial out.
on page 42 and Remote Phone Book
on page 55
Allow Trans Exist Call on page 115) is enabled, you
Configuring Transfer Mode on DSS Key
on page 55
Basic Call Features
for more information).
on page
for more information).
119