Yealink SIP-T27P User Manual page 140

User Guide for the SIP-T27P IP Phone
It is configured for the Retrieve soft key. This park retrieve code will also apply to the call
park key.
Click Confirm to accept the change.
6.
Note
If the Park or Retrieve soft key doesn't appear on the LCD screen, please select Disabled from
the pull-down list of Custom Softkey via web user interface at path Settings->Softkey
Layout.
To park a call in Transfer mode:
During a call, press the Park soft key (You may need to press the More soft key to see the
1.
Park soft key) or the call park key (if configured).
If the call park code is not configured, you need to enter the call park code (e.g., *01).
-
Press
parking lot.
If the call park code is configured, the call will be directly transferred to the shared
-
parking lot.
Note
For some servers, the system will return a specific park retrieve number (park retrieve
code) from which the call can be retrieved after parking successfully.
128
, or the Park soft key. The call will be transferred to the shared