Headset Use; Headset Prior - Yealink SIP-T27P User Manual

Headset Use

If you want to use a wired headset, physically connect your headset and activate the headset
mode for use. For more information on physically connecting a headset, refer to
Installation on page 16.
Note
To use headset, make sure the headset mode is enabled. Contact your system administrator for
more information.
Headset Mode Activation/Deactivation
To activate the headset mode:
Press
1.
The HEADSET key LED illuminates solid green.
Press the line key or the Answer soft key to answer an incoming call. The call will be
connected to your headset automatically.
Enter the desired number and then press the Send soft key, the phone will then place a call
using the headset automatically. For more information on using the headset to place a call,
refer to Placing Calls
To deactivate the headset mode:
Press
1.
The HEADSET key LED goes out.

Headset Prior

You can use headset in priority when headset prior feature is enabled. This feature is especially
useful for permanent or full-time headset users.
on the phone.
on page 90.
again on the phone.
Customizing Your Phone
Phone
63