Yealink SIP-T27P User Manual page 138

User Guide for the SIP-T27P IP Phone
To park a call in FAC mode:
During a call, press the Park soft key (You may need to press the More soft key to see the
1.
Park soft key) or the call park key (if configured).
If the call park code is not configured, you need to enter the call park code (e.g., *68).
-
Press
If the call park code is configured, the phone will dial the configured call park code
-
shown as below:
Do one of the following:
2.
If you want to park the call against the local extension.
a)
1)
If you want to park the call against desired extension.
b)
1)
2)
To retrieve a parked call in FAC mode:
Do one of the following:
1.
If the park retrieve code is not configured, dial the park retrieve code (e.g., *88).
-
If the park retrieve code is configured, press the Retrieve soft key on the dialing
-
126
, or the Park soft key.
Press .
If the call is parked successfully, you will hear a voice prompt confirming that the
call is parked.
Enter an extension (e.g., 4606) where you want to park the call.
Press or .
If the call is parked successfully, you will hear a voice prompt confirming that the
call is parked. The call is parked against the extension you entered.