Call Park/Retrieve - Yealink SIP-T27P User Manual

Enter the conference URI (e.g., conference@example.com) in the Conference URI field.
4.
Click Confirm to accept the change.
5.
Note
Network conference is configurable via web user interface only.
To set up a network conference call:
Place a call to the first party.
1.
Press
2.
The active call is placed on hold.
Enter the number of the second party and then press
3.
When the second party answers the call, press
4.
party to the conference.
Press
5.
The conference is placed on hold.
Enter the number of the new party and then press
6.
When the new party answers the call, press
7.
to the conference.
Repeat steps 5 to 7 until you have added all intended parties.
8.
The procedures to set up a network conference call on specific servers may be different from
introduced above. Contact your system administrator for more information.

Call Park/Retrieve

You can use call park feature to place a call on hold, and then retrieve the call from another
or the Conf soft key to place a new call.
or the Conf soft key to place a new call.
Basic Call Features
, , or the Send soft key.
or the Conf soft key to add the second
, , or the Send soft key.
or the Conf soft key to add the new party
123