Semi-Attended Transfer - Yealink SIP-T27P User Manual

User Guide for the SIP-T27P IP Phone





Semi-attended Transfer

Before performing a semi-attended transfer (except you use dial number method), make sure
that the transfer mode on DSS key is configured as New Call or Attended Transfer. For more
information on how to configure it, refer to
142.
To perform a semi-attended transfer:
Press
1.
Do one of the following:
2.
Enter the number you want to transfer the call to.
-
Press
- Press the Directory soft key, and then select Local Directory. Select the desired
118
Enter the number you want to transfer the call to.
Press or the Transfer soft key to complete the transfer.
If you are using a handset, the transfer can be completed by hanging up the
handset.
Press the Directory soft key, and then select Local Directory. Select the desired
group and search for the contact (Directory should be configured in advance.
Refer to Directory on page
Press , or the Send soft key to complete the transfer.
Press the Directory soft key, and then select History. Select the desired list and
then press or to select the entry (Directory should be configured in
advance. Refer to Directory
Press , or the Send soft key to complete the transfer.
Press the Directory soft key, and then select Remote Phone Book. Select the
desired group and search for the contact (Directory should be configured in
advance. Refer to Directory
more information).
Press , or the Send soft key to complete the transfer.
or the Transfer soft key during a call.
or to dial out.
42 for more information).
on page 42 for more information).
on page 42 and Remote Phone Book
Configuring Transfer Mode on DSS Key
on page 55 for
on page