Banding In Different Colors Occurs; Colors In Printed Images Are Uneven - Canon ipf8300 User Manual

When reinstalling the printer driver, you changed the region selec-
tion of the Media Configuration Tool.
Changing the region selection of the Media Configuration Tool
deletes the region-specific paper information originally registered
on the printer before installation. Using paper with deleted infor-
mation when executing color calibration will prevent the resulting
calibration adjustment value from being applied to all other types
of the paper.

Banding in different colors occurs

The paper feed amount is out of ad-
justment.
Printing does not proceed smoothly
because print jobs are interrupted dur-
ing transmission.
In the Control Panel menu, Adj. Pri-
ority is set to Print Length.
The Printhead is out of alignment.
The Printhead nozzles are clogged.
Streaks may occur if you set the Print
Quality too low.
The type of paper specified in the
printer driver does not match the type
loaded in the printer.

Colors in printed images are uneven

Cause
Line Drawing/Text is selected when
printing images in many solid colors.
iPF8300
Downloaded from ManualsPrinter.com Manuals
Cause
Cause
Adjust the feed amount.
(See "Adjusting the Feed Amount.")
Exit other applications and cancel other print jobs.
Setting Adj. Priority to Print Quality in the Control Panel menu and adjust-
ing the feed amount may improve results.
(See "Adjusting the Feed Amount.")
Adjust the Printhead alignment.
(See "Automatic Adjustment to Straighten Lines and Colors (Head Posi.
Adj.).")
Print a test pattern to check the nozzles and see if they are clogged.
(See "Checking for Nozzle Clogging.")
Choose a higher level of Print Quality in the Advanced Settings of the print-
er driver and try printing again.
Printing in Draft or Standard mode is faster and consumes less ink than in
Highest or High modes, but the printing quality is lower.
(See "Giving Priority to Particular Graphic Elements and Colors for Print-
ing.")
Load paper of the same type as you have specified in the printer driver.
(See "Loading Rolls in the Printer.")
(See "Loading Sheets in the Printer.")
Make sure the same type of paper is specified in the printer driver as you have
loaded in the printer.
1. Press the Stop button and stop printing.
2. Change the type of paper in the printer driver and try printing again.
In Print Priority in the Advanced Settings of the printer driver, choose Im-
age.
Troubleshooting
Prepare paper compatible with calibration in the
newly selected region and perform calibration
again.
Corrective Action
→P.839
→P.51
Corrective Action
> Problems with the printing quality
Corrective Action
→P.845
→P.845
→P.998
→P.777
→P.802
Banding in different colors occurs
>
12
1061