Canon ipf8300 User Manual page 1025

Hide thumbs Also See for ipf8300:

Table of Contents

• When handling the Printhead, always hold it by the grips (a). Never touch the nozzles (b) or metal

contacts (c). This may damage the Printhead and affect printing quality.

• Never touch the ink supply section (d). This may cause printing problems.

• If you need to put a Printhead somewhere temporarily before installation, do not keep the nozzles and

metal contacts facing down. If the nozzles or metal contacts are damaged, it may affect the printing

While firmly holding the Printhead you have removed, use your other hand to remove the orange Protective Part (a).

Squeeze the grips (c) of Protective Part (b) and pull it down to remove it.

• The inside surface of the Protective Part (a) and Protective Part (b) is coated with ink to protect the

nozzles. Be careful not to touch these surfaces when removing the caps.

• The Printhead contains ink to protect the nozzles. We recommend removing Protective Part (b) as you

hold it over the Printhead package or safely out of the way to avoid spilling ink and staining your

clothes or the surrounding area. If ink accidentally spills, wipe off the ink with a dry cloth.

• Do not reattach the Protective Part or protective material. Dispose of these materials in accordance

with local regulations.

Downloaded from ManualsPrinter.com Manuals

Replacing the Printhead

Troubleshooting