Canon ipf8300 User Manual page 844

Handling Paper >
6.
Load the Rewind Spool on the Media Take-up Unit so that the gear of the Rewind Spool (a) meshes with the gear of
the Right Media Take-up Unit (b).
7
7.
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to select the Settings/Adj. tab (
826
8.
Press the OK button.
The Set./Adj. Menu is displayed.
9.
Press ▲ or ▼ to select Take-up Reel, and then press the OK button.
10.
Press ▲ or ▼ to select Auto Feed, and then press the OK button.
The roll is now advanced to the Media Take-up Unit.
Loading the Rewind Spool on the Media Take-up Unit
Downloaded from ManualsPrinter.com Manuals
Media take-up unit >
Important
• If you attempt to load the Rewind Spool with the left and right ends inverted by mistake, the Media
Take-up Unit cannot be turned on.
• If the gear of the Rewind Spool (a) does not mesh with the gear of the Right Media Take-up Unit (b),
the Media Take-up Unit cannot be turned on.
Note
• If the Tab Selection screen is not displayed, press the Menu button.
).
iPF8300