Canon ipf8300 User Manual page 986

Network Setting
Specifying the frame type using the printer Control Panel
1.
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to select the Settings/Adj. tab (
2.
Press the OK button.
The Set./Adj. Menu is displayed.
3.
Press ▲ or ▼ to select Interface Setup, and then press the OK button.
4.
Press ▲ or ▼ to select NetWare, and then press the OK button.
5.
Press ▲ or ▼ to select NetWare, and then press the OK button.
6.
Press ▲ or ▼ to select On, and then press the OK button.
The display reverts to the NetWare menu.
7.
Press ▲ or ▼ to select Frame Type, and then press the OK button.
10
8.
Press ▲ or ▼ to select the frame type to use, and then press the OK button.
The display reverts to the NetWare menu.
9.
Press ▲ or ▼ to select Print Service, and then press the OK button.
10.
Press ▲ or ▼ to select the desired print service, and then press the OK button.
The display reverts to the NetWare menu.
11.
Press the Menu button.
If you have changed any settings, a confirmation message is displayed. In this case, press the OK button.
968
Specifying the Printer's Frame Type
Downloaded from ManualsPrinter.com Manuals
> Network Setting (Windows)
Note
• If the Tab Selection screen is not displayed, press the Menu button.
>
).
iPF8300