Canon ipf8300 User Manual page 1050

Maintenance > Other Maintenance
Remove paper
1.
Remove the paper.
• Rolls (See "Removing the Roll from the Printer.")
• Sheets (See "Removing Sheets.")
Access the Prep.MovePrinter menu
1.
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to select the Settings/Adj. tab (
11
2.
Press the OK button.
The Set./Adj. Menu is displayed.
3.
Press ▲ or ▼ to select Prep.MovePrinter, and then press the OK button.
4.
Press ▲ or ▼ to select the level of transfer, and then press the OK button.
5.
Press ▲ or ▼ to select Execute, and then press the OK button to display the confirmation screen.
1032
6.
Press ▲ or ▼ to select Yes, and then press the OK button.
The printer is now prepared for transfer.
• Level 1
Once preparations are finished, a message on the Display Screen requests you to turn off the printer.
Turn off and pack the printer. There is no need to remove the ink tanks.
(See "Pack the printer.")
• Level 2 and Level 3
Once preparations are finished, a message on the Display Screen requests you to open the Ink Tank Cover.
Remove the ink tanks before packing the printer.
Preparing to Transfer the Printer
Downloaded from ManualsPrinter.com Manuals
>
Shipping Meth-
Level
od (Example)
3 Tipping the Lengthwise: 0–90º
printer or hold- Rotation: 0–30º
ing it upright
for elevators or
stairs
*1: The quantity of cartridges required depends on the capacity of the Maintenance Cartridge in use.
Note
• If the Tab Selection screen is not displayed, press the Menu button.
→P.1036
Permitted Angle of Inclination
→P.786
→P.810
Required
Amount of Ink Mainte-
to Dispose of nance Car-
tridges(*1)
Approx. 1.8 L 2 or 3
(60.9 fl oz)
).
iPF8300