Canon ipf8300 User Manual page 934

Printer Parts > Control Panel
Set./Adj. Menu
Test
Print
Adjust
Printer
9
916
Menu Settings
Downloaded from ManualsPrinter.com Manuals
>
Setting Item
Nozzle Check
Status Print
Interface Print
Paper Details
Print Job Log
Menu Map
Head Auto(Standard)
Posi.
Adj.
Auto(Advanced)
Auto(Expansion)
Manual
Feed Adj. Automatic
Priori- Priori-
Print Quality
ty ty
Print Length
Adj. Auto(GenuinePpr)
Quali-
ty
Auto(OtherPaper)
Description, Instructions
Print a test pattern to check the nozzles.
Print information about the printer.
Print interface settings information.
Print the paper settings as specified in Paper Details.
Print a record of print jobs, including the paper type
and size, amount of ink consumed, and so on. Ink
consumption indicates a rough estimate of the
amount of ink consumed per print job.
( *1 )
→P.923
Print the menu structure.
The printer prints and reads a test pattern for auto-
matic adjustment of Printhead alignment relative to
the printing direction. (See "Automatic Adjustment
to Straighten Lines and Colors (Head Posi.
Adj.).")
→P.839
The printer prints and reads a test pattern for auto-
matic adjustment of Printhead alignment relative to
the printing direction and spacing between nozzles
and colors. (See "Automatic Adjustment to
Straighten Lines and Colors (Head Posi. Adj.).")
→P.839
The printer prints and reads a test pattern for auto-
matic adjustment of Printhead alignment relative to
the printing direction and spacing between nozzles
and colors. Adjustment is performed at a higher level
of precision than Auto(Advanced). (See "Automatic
Adjustment to Straighten Lines and Colors (Head
Posi. Adj.).")
→P.839
Print a test pattern for adjustment of Printhead align-
ment relative to the printing direction. Enter the ad-
justment value manually based on the resulting pat-
tern. (See "Manual Adjustment to Straighten Lines
and Colors (Head Posi. Adj.).")
Specify exact paper feeding, if desired. Normally, se-
lect Automatic. Choose Print Quality for attractive
printing. Choosing Print Quality also makes band-
ing less noticeable. Choose Print Length if you pre-
fer to feed the paper an exact amount. However, note
that slight banding may occur in the direction of car-
riage scanning when Print Length is selected.
Specify this mode with paper identified in the Paper
Reference Guide.
The printer prints and reads a test pattern for auto-
matic adjustment of the feed amount. (See "Auto-
matic Banding Adjustment (Adj. Quality).")
→P.846
Specify this mode with paper not in the Paper Refer-
ence Guide.
→P.841
iPF8300