Assembly instructions
Step 1
Step 2
Install the Rear Stabilizer (5) onto the Main Frame
(1) with the 4pcs of 3/8" x 2-1/4" Hex Head Screws
(50) and 4pcs of 3/8" x 25 x 2T Flat Washers (71) by
using the 12/14mm Wrench (100).
1.
Let the Computer Cable (29) through the
Console Mast Cover (38) and the Console Mast
(2).
2.
Secure the Console Mast (2) onto the Main
Frame (1) with the 7pcs of 5/16" x 5/8" Hex
Head Screws (51), 6pcs of 5/16" x 19 x 1.5T Flat
Washers (72) and 1pc of 5/16" x 20 Curved
Washer (99) by using the 12/14mm Wrench
(100).
5