Assembly Instruction - Energetics Indoor Cycle Racer Manual

Assembly instruction

Attach the front (15) and rear
feet (14) to the frame using the
bolts (9), washer (11) and nuts
(10).
The handlebar post already set
up when you received.
the handlebar stem (29) inserting
into the head tube of the frame.
Adjust the height
securely tighten the release lever
(38) in proper position.
sure the gear shifter (31) on the
right side of handle bar (25).
Insert the seat tower (4) into the
frame's seat tube, adjust the
height and then fix in position
with knob (3). Insert the seat
slider (2) into the seat tower and
fix using the knob (3).
the saddle (1) into seat slider.
Make sure securely tightened.
Attach
and then
Make
Attach
4