Table of Contents
Advertisement
Balsa stick.
6) Attach the speed control to the side
of the motor box using two-sided tape
and tie wraps. Connect the appropriate
leads from the speed control to the mo-
tor. Make sure the leads will not interfere
with the operation of the motor.
Speed control.
Tie-wraps.
Epoxy
145mm
Epoxy
Battery.
INSTALLING THE SPINNER.
The propeller should not touch any
part of the spinner cone. If it does, use a
sharp modeling knife and carefully trim
away the spinner cone where the propel-
ler comes in contact with it.
21
Advertisement
Table of Contents
Need help?
Do you have a question about the YAKOVLEV YAK 3 ARF and is the answer not in the manual?
Questions and answers