Install The Ailerons - Seagull Models YAKOVLEV YAK 3 ARF Assembly Manual

8) After both ailerons are securely hinged,
firmly grasp the wing panel and aileron to
make sure the hinges are securely glued and
cannot be pulled out. Do this by carefully ap-
plying medium pressure, trying to separate
the aileron from the wing panel. Use caution
not to crush the wing structure.
Note : Work the aileron up and down sev-
eral times to "work in" the hinges
and check for proper movement.

INSTALL THE AILERONS

CONTROL HORN.
Fiberglass control horn
Epoxy.
Epoxy.
INSTALL FLAP CONTROL HORN.
Install the flap control horn using the
same method as same as the aileron con-
trol horns.
Fiberglass control horn
Aileron control horn.
Epoxy.
Flap control horn.
5