Yamaha Electone STAGEA ELB-02 Owner's Manual page 86

4
Reference Page
What is a Song? (page 134)
Reference Page
Recalling Recorded
Registrations (page 154)
86
ELB-02 Owner's Manual
Rhythm Sequence
Rhythm Sequence lets you create your own rhythm compositions, connecting together
any of the Electone's existing rhythms as well as original rhythms created on other
Electones that have the Rhythm Sequence Program function (such as the ELS series).
Although this Electone does not have the full Rhythm Sequence Program function, you
can load four rhythm compositions to Sequence numbers [SEQ.1]—[SEQ.4] buttons on
the panel for future recall, using the steps below.
When the rhythm sequence contains Registration Sequence data or Next Unit data, these
data types also can be loaded and played on this Electone.
While a rhythm is playing, sequence data in the Registration data cannot be loaded.
1
Insert the USB flash drive that contains the desired rhythm
sequence data into the [USB TO DEVICE] terminal.
2
Press the [MDR] button and select the desired Song which
contains the Registration data you want to load back to
Electone.
For details on selecting a Song, see steps 2 and 3 on page 135.
This is necessary because the rhythm sequence data is stored as part of the
registration data in the Song (page 147).
3
Load back the desired registration.
If the desired registration is in Unit 1, press the [PLAY/PAUSE] button in
the MDR section to load back the Unit 1 registrations. If the desired
registration is in a Unit other than 1, specify the Unit number then load
back the Unit.
Now the rhythm sequence data has been loaded to Sequence numbers
[SEQ.1]—[SEQ.4] buttons.