Yamaha Electone STAGEA ELB-02 Owner's Manual page 171

5
Start recording by pressing the [C] "RECORD" button, and then
start your performance.
When recording begins, the elapsed recording time is shown in the lower left of
the AUDIO RECORD display.
Once the elapsed recording time is shown, you can load the Registration or play
the Song with the MDR.
Elapsed
recording time
6
When you finish playing, press the [D] "FINISH" button.
Recording stops and the audio file to which your performance is recorded is
automatically named and selected in the AUDIO display.
7
To hear your newly recorded performance, press the [C] "PLAY"
button twice.
Recording the Song playback as audio file
Once you've recorded your performance as a Song using MDR function, you can record
the playback of the Song as an audio file.
1
Connect two compatible USB flash drives, one containing the
Song, and another for recording audio files, to the USB TO
DEVICE terminals.
2
Start audio recording (perform steps 2 – 5 above.)
3
Select the Song on the MDR Display, then start playback of the
Song.
Playback the Song to the end of the Song.
4
Stop the audio recording (perform steps 6 and 7 above).
NOTICE
Never attempt to
disconnect the USB flash
drive or turn the power off
during recording. Doing so
may corrupt the USB flash
drive data or the recording
data.
Deleting files/Renaming files
(page 176)
AUDIO PLAY Display [PLAY Page]
ELB-02 Owner's Manual
Reference Page
171
7