Deleting Banks - Yamaha Electone STAGEA ELB-02 Owner's Manual

To store the Registration:
3
Create your original Registration, then store it to any of the
Number buttons 1 – 16. (This corresponds to steps 1 – 2 on
page 111.)
4

Deleting Banks

Select the desired Bank to be deleted in Page 3 of the VOICE display, then press the
[D] button corresponding to "DELETE" in the display. A message "Are you sure you
want to delete the Bank xx" appears, prompting confirmation of the operation. Press
the [C] "DELETE" button if you want to delete the Bank, or [D] "CANCEL" button
to cancel the operation.
Bank A can only be deleted if data is stored to another bank (other than A).
Data of Banks that follow the deleted Bank will be moved up to the previous Bank
respectively. For example, deleting the Bank A will move the data of Bank B to Bank
A, Bank C to Bank B, Bank D to Bank C, and Bank E to Bank D.
NOTE
When you try to store
Registrations after changing
the Bank, a confirmation
dialog appears. Confirm
whether or not you want to
set the current Bank as the
destination. If you want to set
the current Bank as the
destination, press the [C]
"OK" button, or press the [D]
"CANCEL" button to cancel
the operation.
117
ELB-02 Owner's Manual
5