Saving Two Or More Registration Units To One Song - Yamaha Electone STAGEA ELB-02 Owner's Manual

3
Press the [PLAY/PAUSE] button to record the Registrations, then
press the [STOP] button before the "00:00" indication is shown at
the bottom left of the display.
This is the same procedure as the one shown when you start recording. The
"00:00" at the bottom left of the display indicates that the MDR is recording the
Registrations and being set up for normal recording; pressing the [STOP]
button interrupts this process.

Saving Two or More Registration Units to One Song

                                     
When you want to use various Registrations exceeding five Registration Banks (one
Unit), you should save additional Registration Units to a Song.
Song
Unit 1
1
First make all the desired settings you want to save.
2
Connect the compatible USB flash drive to the [USB TO DEVICE]
terminal.
3
Press the [MDR] button, and select the destination Song which
includes Registration data.
For details on selecting a Song, see steps 2 and 3 on page 135.
Unit 3
Unit 2
Bank E
Bank D
Bank C
Bank B
Registration Memory Bank A
NOTE
Although a maximum of 50
Units can be saved to a
single Song, the actual
amount may differ since the
total number of Banks that
can be saved to 5 Units is
limited to 50. For example,
saving 5 Banks to one Unit
results in a maximum of 10
Units that can be saved to a
Song.
149
ELB-02 Owner's Manual
6