Yamaha Electone STAGEA ELB-02 Owner's Manual page 193

2
Connect the USB wireless LAN adaptor, then call up the Wireless
LAN display.
Press the [UTILITY] button, then use the Page buttons to select Page 6.
3
Press the [B] "WPS" button.
A message appears prompting confirmation of operation. You can cancel the
operation at this point by pressing the [D] "CANCEL" button.
4
Press the [C] "OK" button to start WPS setup, then press the WPS
button on your access point within two minutes.
Appears when connection between the instrument and the
5
After connection between the instrument and the access point is
done successfully, connect the iPhone/iPad to the access point by
referring to the "iPhone/iPad Connection Manual."
WIRELESS LAN Display
access point is done successfully.
193
ELB-02 Owner's Manual
10