Yamaha Electone STAGEA ELB-02 Owner's Manual page 38

2
Reference Page
On/Off status of the Voices
(page 31)
NOTE
Even when the To Lower
function is on, the Pedal
Voices 1, 2 played on the
Lower Keyboard will be
controlled by the Sustain
settings for the Pedal Voices.
(page 63)
NOTE
Even when the To Lower
function is on, the Pedal
Voices 1, 2 played on the
Lower Keyboard will sound
monophonic.
38
ELB-02 Owner's Manual
4
Press one of the Volume buttons of the UPPER KEYBOARD VOICE
1/2 section on the panel to increase the Volume level for the Upper
Keyboard Voice 2.
Since the default Volume level for Voice section 2 is set to minimum, the Upper
Keyboard Voice 2, Lead Voice 2, Lower Keyboard Voice 2 and Pedal Voice 2
will produce no sound even after you select the Voices for Voice section 2. To
play the Voices for Voice section 2, make sure to press the Volume buttons of
the selected Voice 1/2 section on the panel to increase the Volume level. When
the lamp of the [VOICE SECTION 2] button is lit, the Volume buttons of the
Voice sections can be used to set the Volume level specifically for Voice section
2.
Now set the Voices for Lead Voice 2, Lower keyboard Voice 2 and Pedal Voice 2 as you
did for Upper keyboard Voice 2 above.
If you want to turn off the Voices of Voice section 2, set the volume level to
minimum by using the Volume buttons of the selected Voice sections on the panel
while the lamp of the [VOICE SECTION 2] button is lit, or set the status to Off in the
Voice Display [Page 2].
About the To Lower function
Voices selected for the Lead Voice 1, Pedal Voice 1, and Pedal Voice 2 sections can also be
played on the Lower Keyboard when the TO LOWER button in each section is on.
The To Lower function is not available in the Lead Voice 2 section.
When this function is on, the Lead Voice 1 and Pedal Voice cannot be played on the
Upper Keyboard and Pedalboard, respectively.