Connection Examples - External Devices; Playing The Sounds Of The Electone Through An External Audio System; Outputting The Sound Of An External Device Through The Built-In Speakers Of The Electone - Yamaha Electone STAGEA ELB-02 Owner's Manual

CAUTION
Before connecting the
instrument to other
electronic components,
turn off the power of all the
components. Also, before
turning any components
on or off, make sure to set
all volume levels to
minimum (0). Otherwise,
electrical shock or damage
to the components may
occur.
NOTICE
To avoid damage to the
devices, first turn on the
power to the instrument,
then to the external device.
When turning off the
power, first turn off the
power to the external
device, then to the
instrument.
NOTICE
Do not route the output
from the AUX OUT jacks to
the [AUX IN] jack. If you
make this connection, the
signal input at the [AUX IN]
jack is output from the AUX
OUT jacks. These
connections could result in
a feedback loop that will
make normal performance
impossible, and may even
damage both pieces of
equipment.
NOTE
Use audio cables and
adaptor plugs having no
(zero) resistance.
NOTICE
To avoid damage to the
devices, first turn on the
power to the external
device, then to the
instrument. When turning
off the power, first turn off
the power to the
instrument, then to the
external device.
10
NOTE
Use audio cables and
adaptor plugs having no
(zero) resistance.
184
ELB-02 Owner's Manual
Connection Examples — External
2
Devices
Playing the Sounds of the Electone Through an
External Audio System
                                     
By using the AUX OUT jacks, you can connect your Electone to external speakers. If
you're connecting the Electone to a mono device, use only the AUX OUT [L/L+R]
jack (standard phone).
AUX OUT [L/L+R]
Speaker (Left)
By connecting the Electone to an external audio device instead of speakers, you can
record your Electone performance to that device.
Outputting the sound of an external device through
the built-in speakers of the Electone
                                     
By connecting a cable from the external audio device to the [AUX IN] jack, you can
play back the sound of the external device via the speakers of the Electone.
External audio device
Stereo mini plug
Playback sound
[R]
Speaker (Right)
[AUX IN]
Stereo mini plug