Overwriting Registration Data To A Unit - Yamaha Electone STAGEA ELB-02 Owner's Manual

Overwriting Registration data to a Unit

                                     
This operation lets you replace just the Registration Unit without changing the
performance data in already recorded Song data.
1
First make all the desired settings you want to save to the new
Registration.
2
Connect the compatible USB flash drive to the [USB TO DEVICE]
terminal.
3
Press the [MDR] button, and then select the desired Song
containing the Registration you wish to replace.
When a Song contains performance data, a note icon (
of the Song name.
For details on selecting a song, see steps 2 and 3 on page 135.
4
Press the [D] "UNIT" button to call up the UNIT EDIT display.
In the display, the Registration Unit list of the current Song is shown, such as
"UNIT 1" and "UNIT 2. "
5
Select the Registration Unit number you wish to overwrite by using
the DATA CONTROL dial.
6
Press the [B] "SAVE" button.
A message appears prompting confirmation of the operation.
You can cancel the operation at this point by pressing the [D] "CANCEL"
button.
7
Press the [C] "OVERWRITE" button to overwrite (replace).
8
Press the [D] "EXIT" button to exit from the UNIT EDIT Display.
Song icons (page 130)
) will appear at the left
ELB-02 Owner's Manual
Reference Page
151
6