Yamaha Electone STAGEA ELB-02 Owner's Manual page 142

6
142
ELB-02 Owner's Manual
If you want to change the part tempo for ease in recording, perform steps 8 and 9;
otherwise, skip to step 10.
8
Select the TEMPO Page with the Page buttons.
9
Change the playback tempo, if desired.
The playback tempo can be set over a range of 50% to 200% of the original. The
original recorded tempo is 100%; values less than 100% result in a slower
tempo while values greater than 100% result in a faster tempo.
Use the [A] button to select the item, then use the DATA CONTROL dial to
change the tempo.
10
Press the [C] button repeatedly, if necessary, to set "CUSTOM
PLAY" to ON to start recording of the new part or parts.
11
Press the [PLAY/PAUSE] button on the panel to start recording,
then begin playing.
Playback of the previously recorded parts starts immediately. The CUSTOM
PLAY function is used here to record only the parts that have been selected for
recording, and plays back only those parts that have been selected for playback.
While you listen to the parts being played back, start playing the melody on the
Upper Keyboard.
When the end of the recorded performance is reached, playback is
automatically stopped. The length of a subsequently recorded part cannot
exceed the length of the previously recorded parts.
12
To stop the recording, press the [STOP] button.