Storing Registrations To Another Bank - Yamaha Electone STAGEA ELB-02 Owner's Manual

5
116
ELB-02 Owner's Manual
3

Storing Registrations to Another Bank

Registration Memory and Banks
The ELB-02 series lets you create up to five Registration Banks A – E, each of which
consists of 1 – 16 Registration Memories. Although preset various Registrations are
stored to the Number buttons 1 – 16 of only Bank A by default, you can replace them
with your original Registrations. Your original Registrations can be stored also to
Banks B – E, up to a maximum of 80 Registrations. Executing the Initialize function
(page 120) recalls the preset Registrations of Bank A, and then resets the created
Registrations of Banks B – E to their original empty status.
With the default initial settings and Bank A selected, you can store your original
Registrations to Banks A and B. Bank C is available only after Registrations have
been stored to Bank B. Likewise, other Banks (up to Bank E) will not be available
until the Bank preceding it contains data.
To select the Bank:
1
Call up the VOICE Display, then select the Page 3.
The currently selected Registration bank will be shown.
2
Select the desired Bank by using the DATA CONTROL dial.
You can select the Banks from A (at top) to an empty Bank next to the last Bank
containing data. When Banks A and B contain Registration data, for example,
you can select Banks A, B, and C (which is empty). The message shows whether
the selected Bank contains data or not. When you select the Bank containing
data, no message is shown, while a message "Registration is not recorded" is
shown when you select an empty Bank.
Bank D
Bank C
Bank B
Registration Bank A
Bank E