NOTICE
The LCD contrast setting is
automatically saved when
another display is called
up. Make sure to switch to
another display before
turning the power off.
18
ELB-02 Owner's Manual
4
Adjusting the Contrast of the Display
You can adjust the contrast of the display.
1
Press the [UTILITY] button on the panel to call up the Utility display.
Since the contrast setting is set in Utility display Page 1, select Page 1 with the
page buttons if another page is shown.
2
Press the [C] button corresponding to "LCD CONTRAST."
"LCD CONTRAST" is selected and highlighted.
3
Adjust the LCD contrast with the DATA CONTROL dial or by
successively pressing the corresponding button.
You can set the value between -5 – +5.