Yamaha Electone STAGEA ELB-02 Owner's Manual page 183

4 [USB TO DEVICE] terminal
For connecting a USB flash drive. You can save data you've created on the
instrument to the USB flash drive. You can also use this to connect a USB wireless
LAN adaptor (sold separately) for connecting the instrument to an iPhone/iPad via
wireless LAN.
5 MIDI [IN]/[OUT] terminals
For connecting external MIDI devices such a synthesizer or sequencer. You can also
use these to connect with a computer that has a MIDI Interface.
6 [USB TO HOST] terminal
For connecting to a computer with a USB cable. To connect to a computer, make
sure that an appropriate USB-MIDI driver is installed to the computer.
7 [USB TO DEVICE] terminal
Same as "4 [USB TO DEVICE] terminal. "
4
5 6
Front (keyboard side)
Reference Page
• Connecting a USB Device
(page 132)
• Connecting to an iPhone/
iPad (page 192)
7
Reference Page
• Controlling External MIDI
Devices from the Electone
(page 185)
• Controlling the Electone
from an External Device
(page 185)
• What is MIDI (page 187)
• Connection with Computer
(page 186)
ELB-02 Owner's Manual
10
183