Rea® Azalea®
7.4.2 Backrest Minor
B
A
1. Remove the backrest cushion by pulling it forwards, thus
separating the velcro® straps.
2. Loosen both handwheels A and pull the backrest
directly upwards.
3. Lay the backrest on the seat, where it can remain during
transport of the wheelchair.
4. Where applicable, detach the push handles B.
Be careful with the cables that run from the rear
wheel to the push handles
When detaching the backrest and placing it on the
seat, try to make sure that the cables hang freely.
7.4.3 Push handles/push bar
B
A
1. Loosen the two handwheels A.
2. The height of the push handles B can be adjusted
simply by pulling the handles upwards or pushing them
downwards.
42
7.4.4 Remove the legrest angle adjustable
A
1. Push the lever A inwards.
2. Turn the legrest B outwards.
3. Lift of the legrest.
7.4.5 Remove the footrest fixed
1. Push the handle A forwards or sidewards.
2. Turn the footrest B outwards.
3. Lift off the footrest.
7.4.6 Armrest
1. Press and hold the release button A.
2. Remove the armrest.
7.4.7 Rear wheels
B
A
C
B
A
1488727-M
Need help?
Do you have a question about the rea azalea assist and is the answer not in the manual?
Questions and answers